Fluke MET/CAL Procedure ============================================================================= INSTRUMENT: Beckman RMS225: (1 year) CAL VER /5500 DATE: 27-Aug-97 AUTHOR: Fluke Corporation REVISION: $Revision $ ADJUSTMENT THRESHOLD: 70% NUMBER OF TESTS: 32 NUMBER OF LINES: 124 CONFIGURATION: Fluke 5500A ============================================================================= # # Compatibility: # 5500/CAL 4.0 or MET/CAL 4.0 or later. # # Subprocedures: # None # # Required Files: # none # # System Specifications: # TUR calculation is based on specification interval of the accuracy file. # The default 5500A accuracy file contains 90 day specs. # # Fluke makes no warranty, expressed or implied, as to the fitness # or suitability of this procedure in the customer's application. # STEP FSC RANGE NOMINAL TOLERANCE MOD1 MOD2 3 4 CON 1.001 ASK- R P F V 1.002 ASK+ K X 1.003 HEAD PRELIMINARY INSTRUCTIONS 1.004 DISP Warm-up time: NONE 1.004 DISP Temperature: -20 - 50degC 1.004 DISP Humidity: <80% 1.005 DISP [32] WARNING 1.005 DISP HIGH VOLTAGE is used or exposed during the performance 1.005 DISP of this calibration. DEATH ON CONTACT may result if 1.005 DISP personnel fail to observe safety precautions. 1.006 DISP Set the RMS225 to VAC. 1.006 DISP 1.006 DISP *NOTE* If the "battery" symbol appears in the LCD 1.006 DISP [32] display, replace the battery before continuing 1.007 HEAD {AC VOLTAGE} 1.008 DISP Connect the 5500A to the UUT as follows: 1.008 DISP [32] 5500A NORMAL HI to UUT V/OHM 1.008 DISP [32] 5500A NORMAL LO to UUT COM 1.009 HEAD AC VOLTAGE: {10V Range} 1.010 5500 10 0.000V -0U +0.008U 2W 2.001 5500 10 3.500V 0.061U 10kH SI 2W 3.001 5500 10 4.100V 0.070U 60H SI 2W 4.001 5500 10 4.100V 0.070U 10kH SI 2W 5.001 HEAD AC VOLTAGE: {100V Range} 5.002 5500 100 35.00V 0.61U 60H SI 2W 6.001 5500 100 35.00V 0.61U 1kH SI 2W 7.001 5500 100 41.00V 0.70U 60H SI 2W 8.001 5500 100 41.00V 0.70U 1kH SI 2W 9.001 HEAD AC VOLTAGE: {750V Range} 9.002 5500 750 350.0V 6.1U 60H SI 2W 10.001 5500 750 350.0V 6.1U 1kH SI 2W 11.001 5500 750 750.0V 12.1U 60H SI 2W 12.001 5500 750 750.0V 12.1U 1kH SI 2W 13.001 HEAD {DC VOLTAGE} 13.002 DISP Set the RMS225 to VDC. 13.003 HEAD DC VOLTAGE: {1000mV Range} 13.004 5500 1000 900.0mV 2.9U 2W 14.001 5500 1000 -900.0mV 2.9U 2W 15.001 HEAD DC VOLTAGE: {10V Range} 15.002 5500 10 2.500V 0.009U 2W 16.001 5500 10 9.000V 0.026U 2W 17.001 HEAD DC VOLTAGE: {100V Range} 17.002 5500 100 35.00V 0.12U 2W 18.001 5500 100 42.00V 0.14U 2W 19.001 HEAD DC VOLTAGE: {1000V Range} 19.002 5500 1000 350.0V 1.2U 2W 20.001 5500 1000 900.0V -3.9U +6U 2W 21.001 HEAD {RESISTANCE} 21.002 DISP Connect the 5500A to the UUT as follows: 21.002 DISP [32] 5500A AUX HI to UUT V/OHM 21.002 DISP [32] 5500A AUX LO to UUT COM 21.002 DISP [32] 5500A NORMAL HI to UUT V/OHM 21.002 DISP [32] 5500A NORMAL LO to UUT COM 21.002 DISP Connect the SENSE leads DIRECTLY to the UUT. Connect 21.002 DISP the NORMAL leads to the SENSE leads AT the UUT. 21.003 DISP Set the RMS225 to OHMS. 21.004 HEAD RESISTANCE: {1000 Ohm Range} 21.005 5500 1000 900.0Z 6U CW 22.001 HEAD RESISTANCE: {10 kOhm Range} 22.002 5500 10 10.00kZ 0.06U CW 23.001 HEAD RESISTANCE: {100 kOhm Range} 23.002 5500 100 100.0kZ 0.6U CW 24.001 HEAD RESISTANCE: {1000 kOhm Range} 24.002 DISP Connect the 5500A to the UUT as follows: 24.002 DISP [32] 5500A NORMAL HI to UUT V/OHM 24.002 DISP [32] 5500A NORMAL LO to UUT COM 24.003 5500 1000 900.0kZ 6U 2W 25.001 HEAD RESISTANCE: {10 MOhm Range} 25.002 5500 40 10.00MZ 0.17U 2W 26.001 HEAD {DC LOW CURRENT} 26.002 DISP Set the RMS225 to A(DC). 26.003 DISP Connect the 5500A to the UUT as follows: 26.003 DISP [32] 5500A AUX HI to UUT 40mA 26.003 DISP [32] 5500A AUX LO to UUT COM 26.004 HEAD DC LOW CURRENT: {10mA Range} 26.005 5500 10 0.900mA 0.015U 2W 27.001 5500 10 9.000mA 0.076U 2W 28.001 HEAD DC LOW CURRENT: {40mA Range} 28.002 5500 40 25.00mA 0.27U 2W 29.001 HEAD {AC LOW CURRENT} 29.002 DISP Set the RMS225 to A(AC). 29.003 HEAD AC LOW CURRENT: {10mA Range} 29.004 5500 10 9.000mA 0.166U 1kH SI 2W 30.001 HEAD {AC HIGH CURRENT} 30.002 DISP Connect the 5500A to the UUT as follows: 30.002 DISP [32] 5500A AUX HI to UUT 10A 30.002 DISP [32] 5500A AUX LO to UUT COM 30.003 HEAD AC HIGH CURRENT: {10A Range} 30.004 5500 10 1.900A 0.041U 1kH SI 2W 31.001 HEAD {DC HIGH CURRENT} 31.002 DISP Set the RMS225 to A(DC) 31.003 HEAD DC HIGH CURRENT: {10A Range} 31.004 5500 10 1.900A 0.022U 2W 32.001 END